Stemmer Imaging

Bin picking technology broadens subsystem capabilities for Industry 4.0

With the recent acquisition of Infaimon S.L., a leading provider of software and hardware for machine vision and robotics, STEMMER IMAGING has extended its ability to supply subsystems for smart factories and Industry 4.0. The Infaimon InPicker 3D bin picking system can use a variety of 3D imaging techniques such …

Stemmer Imaging

New shape from shading design simplifies integration

With a flat illumination system and integrated light controller for automated generation of lighting sequences, the new SAC trevista FLAT allows easy integration of ‘shape from shading’ inspection for machine builders and integrators. It provides topographic surface defect information down to the micron level as well as suppressing brightness fluctuations …

Stemmer Imaging

New robust lens for 1.1″ sensors down to 3 μm pixel size

The Schneider-Kreuznach Xenon-Opal 2.8/12 compact lens can be used with 12 MP resolution 1.1” sensors such as the IMX253 and IMX304 with pixels down to 3 μm. The maximum chief ray angle of 6° causes close to zero shading on the sensor. Robust mechanics and precise centering and field curvature …

Stemmer Imaging

Machine Vision Technology Forum Tour topped all expectations

More than 1,350 participants from all over Europe attended the STEMMER IMAGING Machine Vision Technology Forum. All presentations held at the industry event are now available for download. STEMMER IMAGING News

Stemmer Imaging

Available for a limited time: 30 % off FK200 Midopt filter kit

A Christmas gift from Midwest Optical Systems (MidOpt)! The leading supplier of standard and customised filters, lenses and machine vision accessories, is offering the FK200 filter kit at the special price of 430 € (instead of 610 €). STEMMER IMAGING News

Stemmer Imaging

Genie Nano CoaXPress cameras built for speed

Offering 16 or 25 MPixel resolution monochrome or enhanced NIR CMOS sensors, the new Genie Nano-CXP cameras from Teledyne DALSA can deliver 80 fps at 25 Mpixel resolution. The small form factor, robust build quality and wide operating temperatures are combined with an exceptional feature set at a highly competitive …

Stemmer Imaging

STEMMER IMAGING AG publishes quarterly figures: Significant growth in revenue and earnings; earnings forecast raised

Revenue increase by 29.7 per cent to EUR 30.5 million in the first three months of the planned short financial year 2019 (previous year: EUR 23.5 million) Adjusted operating result (EBITDA) of EUR 4.0 million and an EBITDA margin of 13.1 per cent are significantly above the level of the …

Stemmer Imaging

Four stages of machine vision in industry

Machine vision is a well-established technique across a host of industries, improving quality and efficiency in the manufacturing and processing sectors. Its ability to make inspections reliably and at speed 24/7 makes it an invaluable enabling technology in quality control. Technological advances in machine vision continue to be made rapidly, …

Stemmer Imaging

Polarisation camera with inbuilt calculations gives new inspection possibilities

The new JAI-GO-5100MP-PGE polarisation camera enables analysis of material thickness, stress points, and other defects not observable using standard imaging techniques. Featuring Sony’s IMX250MZR polarised CMOS sensor this GigE Vision camera can also reduce the effects of reflections and hot spots from shiny materials such as plastics and glass. The …

Stemmer Imaging

STEMMER IMAGING substantiates its growth strategy as leader in artificial vision

STEMMER IMAGING today held its first Capital Markets Day. Presentations by the Executive Board and senior management outlined the mid-term strategy for accelerated growth and upgrade in profitability. New positioning as leader in artificial vision leveraging today’s industrial machine vision competence Increased focus on value-added offerings based on its own …

Stemmer Imaging

Integrating vision into a manual assembly process

Clear Vision Systems (CVS), manufactured by Kautex Textron CVS Ltd are designed to keep vehicle headlamps or the cameras and sensors used in Advanced Driver Assistance Systems clean from dirt, dust, frost, snow, and pollution. They are manufactured at Kautex plants in the UK, USA, China and the Czech Republic. …

Stemmer Imaging

Successful first stop of the Machine Vision Technology Forum Tour

Innovations, ideas and practical examples The machine vision community including both experts and novices currently have the opportunity to learn about industry trends and discuss ideas and projects throughout Europe. For the fourth time, STEMMER IMAGING is organising the Machine Vision Technology Forum Tour. With over 1,000 visitors in Germany, …

Stemmer Imaging

Fast global shutter and ultra-high frame rates for high speed measurements

As one of the first to feature a CXP-12 interface, the Optronis CamPerform Cyclone series of high-speed cameras are sure to create excitement in the machine vision sector. Thanks to the new CXP-12 interface and four CXP-12 channels they can achieve an unprecedented overall data transfer rate of 50 Gbit/s. …

Stemmer Imaging

STEMMER IMAGING publishes business figures for 2018/2019

Group shows revenue growth despite current challenging market conditions Revenue increases by 8.3 per cent to EUR 109.0 million in the 2018/2019 financial year (previous year: EUR 100.6 million) and therefore meets forecast (EUR 108 – 111 million) EBITDA at EUR 10.0 million (previous year: EUR 10.6 million) within the …